Other Parts Discussed in Thread: MSP-TS430PZ100D,
Hi,
Can the MSP-TS430PZ100D be used to initialize pins and run low-level drivers on the MSP430F5438A-EP?
Or which tool would you recommend to do this with?
Thank you in advance.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Can the MSP-TS430PZ100D be used to initialize pins and run low-level drivers on the MSP430F5438A-EP?
Or which tool would you recommend to do this with?
Thank you in advance.
Hello JuMar,
The MSP-TS430PZ5X100 is what is recommended for the F543x devices in LQFP package. The PZ100D is intended for the FR devices and the pinout is different.
And does TI have a GUI based initialization tool to generate auto-code for this?
No GUI for this available. I recommend using the code examples available in resource explorer.
**Attention** This is a public forum