MSP430FR5964: CAD Symbol Error

JosefMieslinger

Part Number: MSP430FR5964

Dear MSP430-Team,

my customer wants to design with MSP430FR5964 in ZVW package.

He downloaded the CAD Model from the TI Homepage.

https://vendor.ultralibrarian.com/ti/embedded?vdrPN=MSP430FR5964IZVWR&sid=0173e2c87e5400543b9f1102452003073003506b00c48&c=1

Unfortunately the model does not match the datasheet - In particular balls B11 and C11 should be Analog Power, but in the model they are marked with P2.0, P2.1 respectively

Can you please review and update?

Thanks and best regards,

Joe

https://vendor.ultralibrarian.com/ti/embedded?vdrPN=MSP430FR5964IZVWR&sid=0173e2c87e5400543b9f1102452003073003506b00c48&c=1

over 3 years ago

0 Dennis Lehman over 3 years ago

TI__Guru 60151 points

Hi Joe,

Sure, let me look into this for you.

0 Jace H over 3 years ago in reply to Dennis Lehman

TI__Guru 56685 points

Hey Josef,

We are working with our vendor to get this updated. Due to the holiday in the US though, it may take some time. We will get back to you by Dec. 2nd for a status update here.

0 Eddie LaCost over 3 years ago in reply to Jace H

TI__Mastermind 38590 points

Josef,

Please see the attached .bxl, which has the correct B11/C11 pinout. Can you please verify this and let me know if this works for the customer?MSP430FR5994IZVW.BXL

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR5964: CAD Symbol Error