CCS/MSP430F5132: To program MSP430F5132 microcontroller with MSP-EXP430FR2433 Launchpad via on-board eZ-FET debug probe

Shamnad

Part Number: MSP430F5132
Other Parts Discussed in Thread: MSP-EXP430FR2433,

Tool/software: Code Composer Studio

Hi,

I've been working on a project based on MSP430F5132 microcontroller and I am using Spy-bi-wire(SBW) interface to program or debug it . I have a MSP-EXP430FR2433 Launchpad with on-board eZ-FET debug probe and using CCS as IDE. When I try to debug it's always giving an error as below.

Please help to resolve the issue.

over 3 years ago

0 Cash Hao11 over 3 years ago

TI__Mastermind 27465 points

Hi,

I could not see your error here. Could you send it again?

Best regards,

Cash Hao

0 Shamnad over 3 years ago in reply to Cash Hao11

Prodigy 75 points

I am sorry for the late reply.

0 Shamnad over 3 years ago in reply to Shamnad

Prodigy 75 points

I found the issue was with capacitor connected b/w RST and GND.In the reference design the value is 2200pf .After i removed that from the PCB its get programmed without any issue. After all i connected a 1000pf capacitor across and now its working without any issue.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430F5132: To program MSP430F5132 microcontroller with MSP-EXP430FR2433 Launchpad via on-board eZ-FET debug probe