This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/MSP430FR2522: Proximity sensing parameters

Part Number: MSP430FR2522

Tool/software: Code Composer Studio

Dear team,

The customer makes a proximity sensor electrode with a width of about 4mm on the edge of a 6.4cm * 1.6cm PCB board.

How to achieve the proximity sensing distance above 10cm, and how to adjust the parameters?

Please help.

**Attention** This is a public forum