This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSPBSL: UART BSL Command Line Utility For MSP430 FLASH Devices

Part Number: MSPBSL
Other Parts Discussed in Thread: MSP430F2274

Hello Guys,

Good day.

In document SLAA760 there is only a mention about the UART BSL Command Line Utility For MSP430 FRAM Devices. is there a UART BSL Command Line Utility For MSP430 FLASH Devices ?

Thanks in advance!

Art

  • Hi Art

    Due to the BSL version for flash device have two different kinds one for 1xx\2xx\4xx devices and the other is for 5xx\6xx devices, both of them are different with FRAM BSL protocol. That is why the command the SLAA760 is not fit for flash device. We have BSL scripter  that can support communicate flash UART BSL in windows or Linux. You can try it

  • Thanks for looking into this Gary!

    The customer cannot use the BSL Scripter on the MSP430F2274 chip as the BSL Scripter does not support the MSP430 1xx/2xx/4xx chip families.

    So, the question remains if there is the Linux command line solution for UART BSL programming of the MSP430F2274 chip?

    Thanks!

    Art

  • We do have a BSLDEMO in the BSL scripter windows version that can support  F1xx/2xx devices. And it include its source code you can use it in Linux.

**Attention** This is a public forum