• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 78 subscribers
  • Views 1981 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430 gang programmer.

abhishek Sabnis
Expert 1730 points
Other Parts Discussed in Thread: MSP430F2132, MSP430F155, MSP430F157, MSP430F156, MSP430F1611, MSP430F1610, MSP430F167, MSP430F1612, MSP430F169, MSP430F168, MSP430F235, MSP430F233, MSP430F2416, MSP430F2410, MSP430F2418, MSP430F2417, MSP430F247, MSP430F2419, MSP430F2471, MSP430F248, MSP430F2481, MSP430F249, MSP430F2491, MSP430F2616, MSP430F2617, MSP430F2618, MSP430FG437, MSP430F2619, MSP430FG438, MSP430FG439

Hi everyone,

I am looking for E2E forum for MSP430 gang programmer. basically i want support for gang programmer. I am familier with MSP-FETU430IF interface which programs 1 micro. this gang programmer uses hex file and programs 8 micro at a  time. In my project i am using incricuit programming feature(SPI-Bi wire). also i want to test my circuit board hardware in which MSP430 is embedded. I know it can be done through DLL commands. but still i need some support about initiating this commands. 

so please let me know if somebody worked with this.

Regards,

abhishek

  • 0
    Prodigy 30 points

    here are couple options for having serial programming for MSP430F2132

     1) MSP430F2132 is already supported on many SuperPro programmers:

    Search Results

    If you want to have serial gang programmer, SuperPro 5004EGP with 4 x ISP socket will do the job. Also SuperPro 5000 series programmers comes with optional DLL support which allows you to control with a third party tool. 

    2) SuperPro IS01 is an In-system programmer. Since the requirement is having a gang programmer to program MSP430F2132 on board, having a fast programmer and the largest outcome should be the most important criteria. SuperPro Is01 has ARM9 RISC MCU. It is a stand alone programmer, and getting couple of those units may address the requirements. It also supports many devices including following ones:

    MSP430F155                         

    MSP430F156                          MSP430F157                         

    MSP430F1610                         MSP430F1611                        

    MSP430F1612                         MSP430F167                         

    MSP430F168                          MSP430F169                         

    MSP430F233                          MSP430F235                         

    MSP430F2410                         MSP430F2416                        

    MSP430F2417                         MSP430F2418                        

    MSP430F2419                         MSP430F247                         

    MSP430F2471                         MSP430F248                         

    MSP430F2481                         MSP430F249                         

    MSP430F2491                         MSP430F2616                        

    MSP430F2617                         MSP430F2618                        

    MSP430F2619                         MSP430FG437                        

    MSP430FG438                         MSP430FG439

     

    contact me for more information.

    mehmet@xeltek.com.

  • 0 in reply to Mehmet Guralp Atesoglu
    Expert 1730 points

    Do you know how to use MSP GANG programmer with DLL extension. currently, i am programming MSP430 with .hex file. but i want to understand how can i use DLL examples for testing functionality of mcro.

     

    Thanks

**Attention** This is a public forum