• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 78 subscribers
  • Views 112 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F67471: Clock input

Viktorija Cecil
Genius 17961 points
Part Number: MSP430F67471

Team,

My customer is looking to replace current MSP430 with larger RAM device on the urgent design. They have identified the MSP430F67471 with 32k bytes of sram.

Their question is:

  • It does not have a X2 clock input that we currently use to operate the micro at 25mhz. 
  • Is there some combination of internal oscillators and modulator settings that will get me to 25 mhz, and what would the stability of that operating clock be?

Thanks

Viktorija

  • 0
    TI__Guru 60181 points

    Hi Viktorija,

    Yes, the MSP430F67471 can generate at 25Mhz MCLK using its DCO.  To maintain good stability, the customer will need to use a 32Khz crystal connected to the LFXT1 oscillator.

  • 0 in reply to Dennis Lehman
    TI__Guru 60181 points

    Hello Viktorija,

    It's been a few days since I have heard from you so I’m assuming your question has been answered.
    If this isn’t the case, please click the "This did NOT resolve my issue" button and reply to this thread with more information.
    If this thread locks, please click the "Ask a related question" button and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.

**Attention** This is a public forum