MSP430FR2110: my program code was crash during work on code composer.

melih culha

Part Number: MSP430FR2110

This error was appeared on working. I did not understand what happened. The program was crash during work. You can see error screenshots and code at the attach.

Could you please help me about this problem urgently?

Thanks and best regards,

5074.code.TXT

over 3 years ago

+1 Bruce McKenney47378 over 3 years ago

Guru 88580 points

Timer B has two separate interrupt vectors: One applies to CCR0 and the other to everything else. You've enabled the CCR0 interrupt and the everything-else interrupt, but you've only supplied the CCR0 ISR (TIMER0_B0_VECTOR).

In context, given the code you already have, I suggest you not use the CCR0 interrupt, since the TBIFG interrupt accomplishes what you want. Specifically::

1) Change TIMER0_B0_VECTOR to TIMER0_B1_VECTOR to get the everything-else interrupt

2) Remove this line:

> TB0CCTL0 = CCIE; // CCR0 interrupt enabled

[Edit: Fixed minor mis-wording.\

0 melih culha over 3 years ago in reply to Bruce McKenney47378

Prodigy 60 points

thankyou bruce. problem is resolved. many thanks.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR2110: my program code was crash during work on code composer.