This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F6725A: Connection with VCCAUX3

Part Number: MSP430F6725A


Is it okay to connect VCCAUX3 to DVSS in the following usages?

Customers utilize an external 32.768 KHz to make the DCO accuracy comparable to an external clock using FLL.
However, XT1 is not used because it uses a bypass route that does not enter XT1.

Customers also do not use the RTC.

Best regards,