BOOSTXL-AUDIO: Application Inquiry

Renan Santos Adriano

Part Number: BOOSTXL-AUDIO

Hello Team,

My customer is working with MSP432RP401R Launchpad + BoostXL-Audio board. They wanted to confirm if they can configure the BoostXL-Audio for an input source other than a microphone (e.g., a function generator or iPhone output), or must apply the signal directly to an appropriate GPIO pin on the MSP432?

Regards,

Renan

over 2 years ago

0 Dennis Lehman over 2 years ago

TI__Guru 60301 points

Hi Renan,

Let me check on this.

0 Renan Santos Adriano over 2 years ago in reply to Dennis Lehman

TI__Genius 16530 points

Hello Dennis,

Any update on your checking? Appreciate your help on this request.

Regards,
Renan

0 Dennis Lehman over 2 years ago in reply to Renan Santos Adriano

TI__Guru 60301 points

Hi Renan,

According to the documentation, a user should be able to input a signal from another source (I'm assume from Android phone headphone jack) through the BoosterPack 3.5mm audio jack.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

BOOSTXL-AUDIO: Application Inquiry