I am trying to program an msp430f123 with the msp gang programmer at first I was getting blank check errors. I then updated the programmer to the latest firmware and now I'm getting error 32 wrong MCU. Any suggestions on what to look at.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I am trying to program an msp430f123 with the msp gang programmer at first I was getting blank check errors. I then updated the programmer to the latest firmware and now I'm getting error 32 wrong MCU. Any suggestions on what to look at.
Hi Vince,
Can you please provide some more details about your setup? This will help us to diagnose your issue.
Regards,
Katie
Hello,
I'm using Gang430.dll to program 8 circuits with interface SBW but msp-gang programmer gets error 32. If I switch the programer with other exactly equal with same software, same connections,... doesn't gets me any error, works ok.
I programmed the 8 circuits with the first programmer using the 'MSP-GANG Programmer' software and works correctly.
Any ideas on what could be the problem?
Thank you
Hi raul,
I saw your post yesterday on the end of another thread, and I split it into its own thread. Typically we like to make a new thread for a new issue/support request instead of posting on the end of an older issue.
Your post and my initial response/questions for clarification are here: http://e2e.ti.com/support/microcontrollers/msp430/f/166/p/378493/1332226.aspx#1332226
-Katie
**Attention** This is a public forum