• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 78 subscribers
  • Views 2424 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR2633: MSP-CAPT-FR2633 not running

HS FAE Germany
Mastermind 30505 points
Part Number: MSP430FR2633
Other Parts Discussed in Thread: CAPTIVATE-BSWP

Hello,
I have the MSP-CAPT-FR2633 EVM. I can program the kit with the CAPTVATE-BSWP-Demo software. I launch the CapTivateDesignCenter and open the project CAPTIVATE-BSWP. I can connect to the EVM but nothing happen. I can't see any button or slider touch. LED5 is on, LED4 blinks, LED3 is off.

What could be the problem. I already had this board running 2 weeks ago.

Regards, Holger

  • 0
    TI__Guru 56685 points
    Hello Holger,

    Have you generated the CCS Project for the BSWP demo within the CapTIvate Design Center? After doing this, you must go to CCS, import the project to your local workspace and download it onto the device. After which you can debug or reset the part and then connect to it via Design Center.
  • 0 in reply to Jace H
    TI__Mastermind 30505 points
    Hello JH,

    > Have you generated the CCS Project for the BSWP demo within the CapTIvate Design Center?
    I use the example project and import it into CCS. How can I generate a CCS project within CapTIvate Design Center?

    Regards, Holger
  • 0 in reply to HS FAE Germany
    TI__Guru 56685 points
    Hello Holger,

    The example that comes downloaded with CapTIvate Design Center should work out of the box, but if you make changes to pin-out or tuning parameters, you will need to regenerate the source code from the CapTIvate Design Center. Double click ont he MSP430 Icon to open up its menu, and you will see a Generate Source Code Button. Please see the CapTIvate Technology Guide for more detailed information.

    www.ti.com/CapTIvateTechGuide
  • 0 in reply to Jace H
    TI__Mastermind 30505 points

    I removed the CCS project and the CaptivateCenter. Then I installed the newest CaptivateCenter from the web and reimported the projects into CCS. And now it runs.

    Regards, Holger

**Attention** This is a public forum