Hello,
I have been working on msp430fr4133.
While I have been able to control its inbuilt LCD screen using the LCD library, but I want to receive its inbuilt temperature sensor's value on the serial port of the Energia.
Kindly help.
Hi Abhishek,
The integrated temperature sensor is part of the power management module (PMM) and must first be enabled.
As shown in the users guide, SLAU445G,
Next, referring to the MSP430FR4133 datasheet, you can see you need to configure the ADC channel 12 that is dedicated to the temp sensor.
Once you set up the ADC, you should be able to read the temperature sensor.
**Attention** This is a public forum
