This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

MSP-GANG: Verify Firmware was programmed correctly

Prodigy 110 points

Replies: 1

Views: 216

Part Number: MSP-GANG

We use the MSP-Gang programmer with a MSP430F2001 processor. 

On our test fixture, we would like to read the checksum or some other method to verify the correct firmware has been loaded to the MSP.   In the MSP-Gang program, there is a "Verify" button, that will check the firmware file in the "Open Code File ->" matches what is programmed into the MSP.

Looking through the user manual, I have been unable to determine which function of the dll is used to complete this process.  Can someone point me to the correct function in the dll?

  • Hello,

    Below API is what you want. 

    Regards,

    Winter

     

    If my post helped solve your issue, please click on the   This resolved my issue  button. 

    Winter,

    Search E2E! Your questions may already be answered! 

    TI Cloud Tools             MSP Product Page

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.