MSP430FR6043: MSP430FR6043

azista%252525252525252520azista

Part Number: MSP430FR6043
Other Parts Discussed in Thread: EVM430-FR6043, , TIDA-01486

Hi,

I have EVM430-FR6043 and want to use it for one of my application which includes 4 transducers. As mentioned by you in one of your threads on forum that you have a TI reference design that extends the 2 channels to support 4 transducers. This design has external power stage and additional gain to measure flow rate in large pipes. I am interested in the same . I request you to please share the design related documents on the below mentioned mail Id.

azista.ahmedabad@gmail.com

I am looking forward for a prudent response from your side.

Thank you,

Azista

over 4 years ago

0 Mitch Ridgeway over 4 years ago

TI__Expert 6635 points

Hi Azista,

Is this the reference design you are talking about?

http://www.ti.com/tool/TIDM-02003

All of the design files can be found there under the "Design Files" section.

Thanks,

Mitch

0 azista%252525252525252520azista over 4 years ago in reply to Mitch Ridgeway

Intellectual 310 points

Hello Mitch,

I have already downloaded these design file. But I have come up with a new application in which I want to connect 4 transducer to single MSP430FR6043 for which while I was going through your forum got a similar raised question. Where you have mailed the questioner with necessary documents for the modification which contains the TI reference design that extends the 2 channels to support 4 transducers. This design has external power stage and additional gain to measure flow rate in large pipes.I request you to please share the same with me on the below mentioned mail id.

azista.ahmedabad@gmail.com

Thanks,

Azista

0 Mitch Ridgeway over 4 years ago in reply to azista%252525252525252520azista

TI__Expert 6635 points

Hey Azista,

Here is a link to a 4 transducer design:

http://www.ti.com/tool/TIDA-01486

This design is made for water flow measurements. It's designed with the FR6047 device, but I believe this has the functionality you are looking for (please correct me if I am wrong).

Are you designing for water or gas?

Thanks,

Mitch

0 azista%252525252525252520azista over 4 years ago in reply to Mitch Ridgeway

Intellectual 310 points

Hello Mitch,

Thank you so much for the link. This was exactly what I wanted. And my design is for Gas flow application but I will extract and modify the desired part from TIDA-01486 accordingly.If you have any such design like TIDA-01486 for gas application using EVM430-FR6043 for 4 transducer please do share it with me, for know I will move ahead with the link provided by you.

Thanks,

Azista

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR6043: MSP430FR6043