This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

MSP-EXP432P401R: Order from Mouser one MSP-EXP432P401R Board out of date alarm in Keil

Prodigy 70 points

Replies: 7

Views: 265

Part Number: MSP-EXP432P401R

Hi,
I get one question during I test the first item:MSP-EXP432P401R ordered from Mouser .
which always show this material out of date and no longer support.please see attached picture .
I wonder why I still get this old part since I order at least for mostly updated new one for evaluation . 
please help to get a solution/replacement  if possible.Thus I may not worry order old version parts  issue happened again.
Regards
Lin
  • Hi,

    I sent it to a concerned engineer. We will get back to you ASAP. Please bare with us.

    Thanks,

    PM

  • In reply to PM:

    Hello Lin,

    Can you share the image of the board you have and the image of the marking on the MCU (MSP-EXP432P401R)?

    Thanks,

    Sai

  • In reply to Sai Reddy:

    Hi Sai,

    Thanks for your help.

    Attach picture  for the board.

    Regards

    LinRe__Shipment_Notification_on_Your_Purchase_Order_17047024_from_Mouser_Electronics,_Inc._Invoice#53382816.zip

  • In reply to Lin Li:

    From the image you posted, the board and MCU are correct versions.

    Which tool is giving you the message that the material is out of date? Did you update it to the latest version and try?

    Thanks,

    Sai

  • In reply to Sai Reddy:

    Hi Sai

    I first set up with keil uVision5, and during download first program, post up this message.

    From the post message this software just say this material is out of date. please consult with TI etc.

    I have no idea to update to latest version  to fix this  alarm .I may try later.

    I wonder Have you think try this way may fix this kind of alarm? 

    Regards

    Lin

  • In reply to Lin Li:

    Hello Lin,

    This might be some issue with uVision installation that is on your system.

    Can you follow the steps in this Quick Start Guide under section 6 Quick Start for Keil

    Thanks,

    Sai

  • In reply to Sai Reddy:

    Sai,

    Sorry too late still try your  good advise,I tried in CCS for test run  msp432 with DRV8886  recently .

    After I upgrade the MSP432P4xx_DFP pack only in Keil  pack installer , without other update installed , I try a sample code , no more material out of date alarm .

    SInce I am very fresh with Keil,  thanks for your  good  advice and solution. 

    thanks!

    Regards

    Lin

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.