This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

MSP430F6779A: Sigma Delta Pin assignment and MSP-EM-DESIGN-CENTER

Prodigy 110 points

Replies: 2

Views: 85

Part Number: MSP430F6779A

I would like to confirm about Sigma Delta Pin assignment which use with MSP-EM-DESIGN-CENTER. Can I use pin SD3 for Voltage, SD0 for CT sensor and SD1 for R-Shunt sensor with TI lib MSP-EM-DESIGN-CENTER, is it work to assign pin like this, anything I need to consider or not?

  • Hello Siwadon,

    sorry for the delay in our response, we will come back to you on this as soon as possible, if not today, then by next Monday. Many thanks for your patience.

    Best regards

    Peter

  • Hi Siwadon,

    You should be able to use this pin assignment provided it matches the hardware connection you have on your board. The pin assignments in the EMDC example projects are made according to the EVM connections.After making these connections, you'll need to go through the other tabs under Library configuration/Phases tab where you'll need to rename the voltage/current pairs before checking for errors and generating the code. You can learn more by referencing this section in the EMDC Technology Guide.

    BR,

    Leo

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.