This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

MSP-ULTRASONIC-DESIGN-CENTER: Communication to MSP-430FR6047

Prodigy 60 points

Replies: 1

Views: 64

Part Number: MSP-ULTRASONIC-DESIGN-CENTER

Hello to all,

is it possible to use the USS-App without the HID-Bridge on the EVM(MSP430FR6047)? E.g. with the MSP-FET and JTAG interface? Please let me know if there are more options.

Thank you!

  • Hello Matthias,

    The USS Design Center GUI communication requires the HID bridge.  If you are using a custom MSP430FR6047 board, you could include I2C and wire your SDA, SCL, and IRQ lines to the EVM430-FR6047 HID bridge and only use the HID bridge on the EVM. 

    Best Regards,

    Eddie

    Don't forget to verify answers to your forum questions by using the  Verify Answer  button.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.