This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

MSP430F6779: Sub Metering using MSP430F6779 and EMDC

Prodigy 220 points

Replies: 4

Views: 75

Part Number: MSP430F6779

Hello

We are building a sub metering application using f6779 and EMDC. 

Is it possible to have more than 1 current sensor on one phase/voltage?

Regards

Bilal

  • Hi Bilal,

    Yes, you can have more than 1 current sensor.

    Srinivas

  • In reply to Srinivas Lingam:

    I have tried following but getting duplicate phase on errors.

    Can you suggest what i need to do to achieve this please.

  • In reply to Bilal.m.Ahmad:

    Hi Bilal,

    My colleague who is an expert on metering had the following observation:

    "He needs to select different phase names even though it’s similar to a single-phase system. The phase labels help identify which results come from which sensors. Other than that, his voltage and current channel settings look good."

    Srinivas

  • In reply to Srinivas Lingam:

    Understand.

    Thanks... 

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.