This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: MSP430FR5949
Customer is evaluating MSP430FR5949 using Internal Clock Source.To reduce the power consumption during a standby state,they are planning to use LPM as much as possible.
Is there any sample codes of the cases between LPMx and AM transition as shown below to understand clock register configurations?
1. LPM1 (wait 10 sec) <--> Active mode2. LPM3 (wait 10 sec) <--> Active mode
In addition, is there any state diagram to configure the each mode?
Hi Yoshita, Please find LPM0 and LPM3 code example on MSP430FR59xx, MSP430FR58xx Code Examples (Rev. L).
on the difference between LPM0, LPM1, LPM2, please refer to: e2e.ti.com/.../670342
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.