MSP432P401R: Using PinMux, getting (back) the "barematal" configuration files is still possible?

Michel Walsh

Part Number: MSP432P401R

At "https://training.ti.com/developing-msp432-mcus-ti-cloud-tools?context=31253-174357" , around 14:30, it shows the possibility to have the "bare-metal" configuration files, which seem to be exactly what I was looking for, in part, but right now, (by default?) I can only reach the generated code using Drivers. Is it possible to get the "bare-metal" configuration files or those have been deprecated?

over 3 years ago

0 Leonardo Estevez over 3 years ago

TI__Genius 12615 points

Hi Michel,

You should be able to find register level code examples for MSP432P401R in the resource explorer:

https://dev.ti.com/tirex/explore/node?node=AOqyDJonBtS4QACP3tJVEg__z-lQYNj__LATEST&search=msp432p401

BR,
Leo

0 Michel Walsh over 3 years ago in reply to Leonardo Estevez

Intellectual 282 points

Right, but PinMux adds to the functionality by producing different piece of code accordingly to the functions that we add in, iteratively, which is even more instructive. A little bit as if it was answering to questions that we may have (up to some obvious limitations). Sure, the code produced by the Drivers also produces code dynamically, but at a much higher level which hides most of the details which may be of interest.

0 Leonardo Estevez over 3 years ago in reply to Michel Walsh

TI__Genius 12615 points

Hi Michel,

You should be able to find the PinMUX utility in SysConfig:

https://www.ti.com/tool/SYSCONFIG?keyMatch=SYSCONFIG&tisearch=Search-EN-everything&usecase=GPN

BR,
Leo

0 Michel Walsh over 3 years ago in reply to Leonardo Estevez

Intellectual 282 points

That seems to add the extra bits of information that I was missing. Thanks.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP432P401R: Using PinMux, getting (back) the "barematal" configuration files is still possible?