This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR2532: Read out data with CAPTIVATE-PGMR Tool

Part Number: MSP430FR2532
Other Parts Discussed in Thread: CAPTIVATE-PGMR,

Dear TI-Team,

my customer has implemented a proximity sensor with CapTIvate technology. he is using the MSP430 CapTIvate MCU Programmer CAPTIVATE-PGMR tool and wants to read out the raw data of the sensor. Unfortunately this did not work out so far :-(

Can you please give us some guidance how to read out debug Information with CAPTIVATE-PGMR tool from MSP430FR2532?

Thanks and best regards,

Joe

  • Hi Josef,

    I didn't see it mentioned in your post, but I assume your customer is using a custom board. Is that correct? If so and the MSP430FR2532 has been programmed with the CapTIvate code, I suspect that the communication connections between the programmer board and the FR2532 are not correct.

    The CapTIvate Technology Guide contains a wealth of knowledge. I would start by reading through the CAPTIVATE-PGMR section (found here) which describes the necessary connections.

    Regards,

    James

**Attention** This is a public forum