EVM430-FR6043: MSP430FR6043 Design center debug plots help needed

Israel Feldman

Prodigy 205 points

Part Number: EVM430-FR6043

Hi,

Anyone can help to understnad on how to work in debug mode while printing to plot2,plot3,plot4.

I can plot only into plot1 but not tree others.

How can I control which plot will display my output?

In screenshoot below, you can see I printed out my data and looking the way how to print on other plots.

over 3 years ago

0 Dennis Lehman over 3 years ago

TI__Guru 60181 points

Hello Israel,

Let me check with our USS experts for help on this.

0 Israel Feldman over 3 years ago

Prodigy 205 points

Hi Dennis,

Is any update from USS expert?

Israel

0 Eddie LaCost over 3 years ago in reply to Israel Feldman

TI__Mastermind 38590 points

Hello Israel,

In hmi.c see the CommandHandler_transmittAdvancedDebugData(). Send temperature, send search quadrant count, and send meter constant index are using the other debug windows and can be used as a reference.

0 Israel Feldman over 3 years ago in reply to Eddie LaCost

Prodigy 205 points

Hello Eddie,

Thanks a lot for your reply!

This function may help to resolve my issue but I can't find a usage of this function so I wonder what are the arguments could be for "plotterNumber" as I guess this control in which plot window to send my data.

Best Regards,

Israel

0 Israel Feldman over 3 years ago in reply to Eddie LaCost

Prodigy 205 points

I found configuration only at ussDCCommandHandlers.c but not the usage as you said in hmi.c.

Which version of project you have?

Israel

0 Israel Feldman over 3 years ago in reply to Eddie LaCost

Prodigy 205 points

Hi Eddie,

Finnaly I found out hot to send the data to different plots by simply numerate the plot using the function you gave me but I encountered another issue.

When i write below code in "ussDCCommandHandlers.c" (just after transmitting the source signal to DTOF,UPS&DNS ,Floarate plots) ,in debug window plots, only plot 4 is running while all other are stuck.Do you know what is the root cause for that phenomenon?

My added rows:

CommandHandler_transmittAdvancedDebugData(txPacket, algRes->deltaTOF,1);
CommandHandler_transmittAdvancedDebugData(txPacket, algRes->totalTOF_UPS,2);
CommandHandler_transmittAdvancedDebugData(txPacket, algRes->totalTOF_DNS,3);
CommandHandler_transmittAdvancedDebugData(txPacket, algRes->volumeFlowRate,4);

My Debug window as a result:

0 Dennis Lehman over 3 years ago in reply to Israel Feldman

TI__Guru 60181 points

Hi Israel,

Eddie is out on leave for quite awhile. Let me see if I can locate someone else that can help with this. What is your status?

0 Israel Feldman over 3 years ago in reply to Dennis Lehman

Prodigy 205 points

Hi Dennis,

I still stuck on that (only last written code for any appropriate plot is working, all written previously are not) as was waiting for someone contacting me by no one still replied so far.

Appretiate your prompt response

Israel