Hi Team, seeking for your assistance.
For EK-TM4C1294XL, the http://ti.exosite.com is already no accesible. Do we have a workaround for this?
Thank you.
-Mark
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team, seeking for your assistance.
For EK-TM4C1294XL, the http://ti.exosite.com is already no accesible. Do we have a workaround for this?
Thank you.
-Mark
Mark, Regarding your last message, thank you. I already have that document and have tried what it suggests. When i try to go to Exosite, there are no free of charge options, only different levels/tiers of payment subscriptions. I am just getting started with TI and embedded development and am in no way prepared to pay monthly subscriptions. Please advise next steps.
I already have that document and have tried what it suggests. When i try to go to Exosite, there are no free of charge options, only different levels/tiers of payment subscriptions. I am just getting started with TI and embedded development and am in no way prepared to pay monthly subscriptions. Please advise next steps.
Hi Jim,
Looks like there is a change of business model at Exosite. I'm waiting for more details from Exosite. I will update this post when it is ready.
Not IoT necessarily. I purchased this board specifically because it has Ethernet. The primary interest is communications (Serial, USB, Ethernet) and digital I/O. Past that, skies the limit and yes IoT is of interest. At this point, i cant even get the IP address of the unit without connecting to Exosite, which i cannot do. At the end of the day, I am very new to embedded development and looking for a good hassle free starting point.
Hi Jim,
If you want to get started with Ethernet then there are quite a few examples in TivaWare library. Not sure if you downloaded TivaWare yet. If not please download from https://www.ti.com/tool/SW-TM4C.
Once TivaWare library is installed you can find the Ethernet examples in the below locations. I will suggest you start with enet_tcpecho_server or enet_lwip or enet_io. Connect your board to the network with the Ethernet cable and run these examples and you will see the DHCP IP address displayed on the terminal window.