Part Number: DK-TM4C129X
Hi , I received the DK-TM4C129X launchpad.
After powering it, weather demo was warning.
Then, after installing stellaris icdi drivers available in the USB kek on my win10 pc, I launched CComposer,I configured it, I developed a simple led blink application,then I flashed it on the micro available on the dev kit.
The flashing procedure got stuck. I powered the board again and now it is not possible to flash it anymore.
Enclosed the board,with the jumpers configuration for you to check.
I also launched LM flash programmer applicationto try to erase and flash the binary from there, but when I try to do this it says: Unable to find the target.
I checked on Win10 device management whether stellaris drivers were correctly loaded and they are.
How can I deal with this issue?
Bests,