RM48L952: rm48l952

Hi Praveena,

We have EMAC loopback example generated by HALCOGen. The example works without any issue.

I don't have WI-FI example. 

What do you mean the loopback code to USB? 

Hi Wang,

USB.zip

This code I have got from one of the TI forum.

Some W2fc ISR code.

So can you please check once.

Thanks & Regards,

Praveena M

I don't know those code. You can get help if you post question to that forum.

Hi Wang,

e2e.ti.com/.../rm48l952-rm48-usb-host-driver

In this link you had mentioned that you had checked for USB connectivity test.

Can you please check once.

Thanks & Regards,

Praveena M

Hi Wang,

Can you please provide that simple project to test USB loopback between ohci host and the w2fc device(that you mentioned in one of the forum-I shared the link).

Thanks & Regards,

Praveena M

Hi Praveena,

I am sorry I don't remember this example code is from me . What are the problems when you run this loopback project?

If you run the loopback on TI HDK, please turn on Channel 1 and Channel 3 of the dip switch S2. This dip switch is located at the left bottom corner.