CCS/TM4C123GH6PM: SEARCHING FOR A BOOSTERPACK

niranjan kumar85

Part Number: TM4C123GH6PM

Tool/software: Code Composer Studio

Hi guys,

I am planing to purchase some booster pack which support the SD CARD read/write,can any one provide me is there any booster pack available which support the TM4C123GH6PM microcontroller.While searching i got some link

these will support my processor and provide some detail regarding the booster pack and SD CARD interface module.Provide me some detail for these..

over 6 years ago

0 niranjan kumar85 over 6 years ago

Prodigy 230 points

Sorry it was not properly attached
store.43oh.com/index.php
doc.43oh.com/The_Card_Reader_SDCard_BoosterPack
43oh.com/.../

whether it will support my controller and provide me some detail regarding the modules.

0 Bob Crosby over 6 years ago in reply to niranjan kumar85

TI__Guru 72500 points

It will work. You have to set the MISO and MOSI jumpers correctly. You will use SSI2 but you will need to do the chip select on PA5 as a GPIO instead of using the SSI2FSS signal.

0 niranjan kumar85 over 6 years ago in reply to Bob Crosby

Prodigy 230 points

Thanks bob,

I have a question why i want to use PA5 as a chip select is their is any reason for that.In that booster pack whether i can able to put max up to 32 GB SD CARD it will support or not.

0 Bob Crosby over 6 years ago in reply to niranjan kumar85

TI__Guru 72500 points

When you plug the booster pack on top of the Launchpad, the connection for the CS on the SD card aligns with the Launchpad pin PA5. It should work with a 32GB SDHC card.

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/TM4C123GH6PM: SEARCHING FOR A BOOSTERPACK