This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8847: Set the OUT1 and OUT2 to logic high

Part Number: DRV8847

Hi Team,

Our customer will use the DRV8847 to drive a relay. However, she would like to know if she can set OUT1 and OUT2 to logic high to break or deactivate the relay. Table 3 of the datasheet shows the outputs 1-4 at different conditions except for all outputs at logic high. Can you please confirm if she may set the OUT1 and OUT2 to high?