Part Number: DRV2511Q1EVM
I have a new DRV2511Q1EVM out of the box that is not recognized by USB.
This is what I did.
- Install and opened Haptics Control Console
- In Haptics Control Console Tools menu, selected the DRV2511
- Connected micro USB connector from EVM to PC (Green 3.3V LED lights)
- Haptics Control Console in "Connection" status says "Hardware Not Connected"
- Device Manager show no new devices
Tried different cables, USB ports and PCs with the same results.
I also tried applying +5V to J5 with no change.
According to the user guides, the DRV2511Q1EVM comes out of the box ready to communicate with Haptics Control Console. All jumpers appear to be in the correct positions.
