• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 77 views
  • Users 0 members are here
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV110: Configuring Peak and Hold Currents via software with uController (SW) and not with passive components(DRV110)

Abdul Rahim
Prodigy 20 points
Part Number: DRV110

Please suggest any MCU,Configuring Peak and Hold Currents via software with  uController (SW) and not with  passive components(DRV110)

  • 0
    TI__Intellectual 805 points

    Hi Abdul,

    DRV110 requires passive components to operate as intended. Since you are interested in configuring current levels via software, the best suggestion I have for you is to design a system that has capability of switching between the pre-defined/calculated resistor networks that fits your application. 

    For example, you could control a MUX via software that connects the different peak/hold current configurations. Nonetheless, you will need to populate passive components regardless of what method you chose to complete your design.

    TI's MSP430 Launch Pad is a great platform to develop the software capable of controlling the passive component switching.

    I hope this resolves your question.

    Thanks,

    Kevin