• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 137 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV2605L: ESD protection on output?

Steve Wenner
Genius 3190 points
Part Number: DRV2605L

Hello...

I am using the above subject in a clothing environment where static electricity will definitely exist.  The drivers will be connected and disconnected from ERMs.  Can you tell me what you would recommend for ESD / High Voltage protection on these lines if anything?

Sincerely.

Steve

  • 0
    TI__Genius 13610 points

    Hello Steve,

    If chip is properly ground and connected to a larger circuit or PCB than you should not need to worry about ESD, there is high likelihood of damage when chip is isolated from anything else has no pathway to discharge any charge it receives.

    Best Regards,

    Carson