LMD18200: LMD18200

Roi Kobo

Intellectual 610 points

Part Number: LMD18200

Hello

Regarding the digital signal: PWM,DIR and BRAKE, the logic voltage can be 3.3V,right?

In data sheet the digital IO is 5V level voltage, There is any reson for that?

over 3 years ago

0 Ryan Kehr over 3 years ago

TI__Guru 55365 points

Hello,

From the spec table, I see those pins are TTL compatible...2V for logic high, 0.8V for logic low. As long as you exceed those levels, the device will work fine.

Regards,

Ryan

Motor drivers

Motor drivers forum

LMD18200: LMD18200