This is aki.
I'm not familiar with PSpice for TI yet, and I'm sorry for the rudimentary question.
I have a question about the link below.
I faced the same problem that Philipp Schneider faced here. That is, the following error message.
ERROR (ORPSIM-16551): Floating point computation failed during Device / Model Load. Possible solutions: 1) Ensure that all device parameters are in valid range. 2) Try using .options LIMIT
The solution seems to be to apply the DRV8701 correct simulation file shown in this link, DRV8701_PSPICE_TRANS.zip, to PSpice for TI, but I don't know how to apply it, please let me know.