Hi team,
When I installed DRV10983EVM, a problem occurred. How to solve this?
Br,
Naizeng
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
When I installed DRV10983EVM, a problem occurred. How to solve this?
Br,
Naizeng
Hello Naizeng,
The team will get back to you tomorrow!
Thanks,
Matt
Hi Naizeng,
The DRV10xx GUI software is only compatible with LabVIEW Run-Time Engine 2014. It looks like you have installed a higher version of the Run-Time Engine which is not compatible.
Please download the 2014 Run-Time Engine from the link below: https://www.ni.com/en-us/support/downloads/software-products/download.labview.html#306245
Note, the 2014 Run-Time Engine is compatible with Windows 10 (the lack of documentation on LabView's website). As a result, please uninstall the DRV10xx GUI Software, then install the 2014 Run-Time Engine, and finally, reinstall the DRV10xx GUI software.
Let me know if this solves your problem.
Regards,
Vishnu