I have a new design that is using the MCT8316Z, but do not see stock on this at TI or anywhere else. Please let me know if someone can line me up with 12 samples of the MCT8316Z for my Engineering builds.
Thank you,
Randy Holmberg
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I have a new design that is using the MCT8316Z, but do not see stock on this at TI or anywhere else. Please let me know if someone can line me up with 12 samples of the MCT8316Z for my Engineering builds.
Thank you,
Randy Holmberg
Hi Randy,
I'll check with the marketing team to see when we are restocking the TI store with MCT8316Z. Is this for MCT8316Z0T or MCT8316Z0R?
Thanks,
Aaron
We are planning to use the Hardware variant of the device which is the one that we think will be available sooner than later - should be the MCT8316Z0T.
Please also let me know if somehow the SPI variant would be available sooner as well. Thank you.
Hi Randy,
Waiting for response from the marketing team for next steps.
Thanks,
Aaron
Hi Randy,
Currently we have no production samples available and we are trying to remove any pre-production samples available on ti.com. Once we get those removed fully, we will be counting our supply of production ICs and distribute between TI store and internal orders accordingly.
Can you please reach out to me over personal message on E2E so I can communicate with you about an internal order once supply is available? We will be RTM'ing MCT8316Z0R samples in December so that may the next batch you can order on ti.com, otherwise we can try and get you 12 samples internally in the next few weeks.
Thanks,
Aaron
Hi Aaron,
We are working on a board design that uses the MCT8316Z0T part - one way or another we need to get at least some of these parts as soon as we can. Looks like distribution offers 3000 piece reels at a 12 week lead time. I don't mind ordering 3K parts, but do mind waiting 12 weeks - please let me know what you can do to get us 6-10 parts within the next few weeks or so.
Hi Randy,
Let's take this discussion offline, I received your PM request and can loop you in with the right personnel.
Thanks,
Aaron