DRV8243-Q1: DRV8243HQRXYRQ1 Packing information

Kenta Ueda

Prodigy 150 points

Part Number: DRV8243-Q1

Dear whom it concerns,

Appreciate for your support.

I would know DRV8243HQRXYRQ1 product Tape and Reel information and Box dimension.

1. Tape and Reel information

I confirmed below Tape and Reel condition on advanced information.

Is this same as RTM product ?

2.Box dimension

I confirmed below box dimensions on advanced information.

Is this same as RTM product ?

Best regards

Kenta Ueda

over 2 years ago

0 Wang5577 over 2 years ago

TI__Guru 56650 points

Hello, Ueda-san,

I saw you had a post before to correct the tape and reel info: (+) DRV8243-Q1: DRV8243-Q1 Taping dimension - Motor drivers forum - Motor drivers - TI E2E support forums.

Right now, the tape and reel info is not updated yet. After it is updated, I would think it will be same as RTM product unless you get a notice about the change. Same, I would think the box will be same as RTM product.

Regards,

Wang Li

0 Kenta Ueda over 2 years ago

Prodigy 150 points

Dear Wang Li san,

Thank you for your reply.

I understood the tape and reel information.

And I'm really sorry for my lack of view with past post.

And I would confirm Pin 1 Quadrant.

Would you kindly let me know?

Best regards

Kenta Ueda

NEXTY Electronics Corp

0 Wang5577 over 2 years ago in reply to Kenta Ueda

TI__Guru 56650 points

Ueda-san,

I will let you know Pin 1 Quadrant as soon as possible.

Regards,

Wang Li

0 Ryan Kehr over 2 years ago in reply to Wang5577

TI__Guru 54645 points

Ueda-san,

It is listed in the datasheet as Q1 and also on page 70. Is this not what you are looking for?

Regards,

Ryan

0 Kenta Ueda over 2 years ago

Prodigy 150 points

Dear Ryan Kehr san,

Thank you for your reply.

I confirmed that Pin 1 is Q1 position in tape.

Best regards

Kenta Ueda