MCT8316AEVM: Which register should be write to control DRVOFF via I2C?

Kenji

Part Number: MCT8316AEVM

Hi Team

Which register should be write to control DRVOFF via I2C?

I could find a registrar that controls BRAKE and DIR.
Is there register for DRVOFF?

+1 Vishnu Balaraj over 2 years ago

Hi Kenji-san,

DRVOFF is a hardware pin and can only be enabled/disabled by pulling high or low. There is no register associated to this function.

Regards,

Vishnu

0 Kenji over 2 years ago in reply to Vishnu Balaraj

Thank you.

I'll ask for reconfirmation, BRAKE and DIR can be controlled by I2C, right?

0 Andrew Liu over 2 years ago in reply to Kenji

Hi Kenji,

Thanks for posting your question to e2e - please give us some time to investigate this further

Responses may be delayed a bit due to the team being out during holiday timeframe

Best Regards,
Andrew

+1 Vishnu Balaraj over 2 years ago in reply to Kenji

Yes, BRAKE and DIR can be controlled by I2C.

Motor drivers forum