Dear DRV team,
Could you please point me on a C example to configure DRV8350RS through SPI ? If not available for this device do we have a similar device configuration example?
Thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear DRV team,
Could you please point me on a C example to configure DRV8350RS through SPI ? If not available for this device do we have a similar device configuration example?
Thanks
Hi Yves,
Please visit the E2E FAQ on SPI Configuration and Use: https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/937258/faq-spi-configuration-and-use
We also have SPI drivers for DRV835x, for MSP430 and C2000 MCUs. These are in structure form and are accessed through hardware abstraction layer.
MSP430-based SPI drivers are here:https://www.ti.com/lit/zip/slvc755
C2000-based SPI drivers are here: https://www.ti.com/lit/zip/slvc736
Thanks,
Aaron