DRV8353RS-EVM: bldc

athivel A

Prodigy 20 points

Part Number: DRV8353RS-EVM
Other Parts Discussed in Thread: DRV8353

i can't change IDRIVE value in the register .can you please say me procedure to change that value.

over 2 years ago

0 Aaron Barrera over 2 years ago

TI__Mastermind 26046 points

Hi Athivel,

The IDRIVE values are fixed in the current GUI to prevent damage to the FETs or DRV8353.

Please use version 1.0.0 of the GUI to change IDRIVE values. Do not increase higher than the current values or else you may damage the DRV or FETs on the EVM.

https://dev.ti.com/gallery/view/5063756/DRV8353Rx/ver/1.0.0/

Thanks,
Aaron

Motor drivers

Motor drivers forum

DRV8353RS-EVM: bldc