Hi support team.
My customer has requested Spec of GBW and Slew late(SR).
Is it possible to provide this information?
Best regards,
Higa
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi support team.
My customer has requested Spec of GBW and Slew late(SR).
Is it possible to provide this information?
Best regards,
Higa
Hi Higa-san,
We need to check if we have GBW and slew rate specs for SOx outputs.
We support 30pF capacitive load at the SOx pin. Adding RC filter will increase settling time and decrease the slew rate with higher capacitances.
Thanks,
Aaron
Hi Aaron-san
Thank you for your support.
I am looking forward to your checking.
Best regards,
Higa
Hi Higa-san,
We do not support slew rate setting for SOx.
For GBW, the closest we can provide is tset. When a step on SOX = 1.2V is provided, it introduces a settling time of no more than 1us. The frequency range of the step input is unknown, but we have validated our CSAs up to 5 MHz cutoff frequency.
Thanks,
Aaron
Hi Aaron-san
Thank you for confirming and kind support.
I understood.
Thanks.
Regards,
Higa