This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV8300DIPW-EVM: How to give Speed Reference from Potentiometer when used along with LaunchXL-F280049C for BLDC Motor control

Part Number: DRV8300DIPW-EVM
Other Parts Discussed in Thread: LAUNCHXL-F280049C,


Planning to Test DRV8300DIPW-EVM + LaunchXL-F280049C  - BLDC 6 step motor control Solution on our 2 wheeler Hub motor. 

Speed reference has to  be from a Potentio Meter ( In fact Throttle. which is similar to a potentio meter).

Could not find any details of analog speed reference proision in development board documents. Please provide details.

Also, LaunchXL-F280049C needs a 5V  power supply. Can this provided from DRV8300DIPW-EVM ?

We have only 48V Battery on 2 wheeler. Plan is to do initial testing on 2 wheeler using these 2 boards, with 48V power from Battery , Speed reference from Throttle (Potentiometer)