DRV2605LEVM-MD: Haptic control console software only recognizes DRV2605L, not DRV2605LEVM-MD

Denis Branson

Part Number: DRV2605LEVM-MD
Other Parts Discussed in Thread: DRV2605L

HCC does not recognize the DRV2605LEVM-MD. Tagged as haptics board.

Operating with external power. Have tried different USB cables.

When using the console for DRV2605L, I connot reporgram to different frequency (want 250Hz, stays at 229 regardless of setting entered.

over 1 year ago

0 Jeff McPherson over 1 year ago

TI__Mastermind 22845 points

Hi Denis,

I apologize for the frustration on this issue. Did you want to separate the EVM connection issue from your last thread, or can we keep the conversation in one place on your previous thread.

Thank you,

Jeff McPherson

0 Denis Branson over 1 year ago in reply to Jeff McPherson

Prodigy 40 points

Jeff-

Keep in 1 thread. I only split because there was no reply button, and I thought I may have maxed the thread length.

0 Jeff McPherson over 1 year ago in reply to Denis Branson

TI__Mastermind 22845 points

Ok I understand.

I don't know why the reply button disappeared. I'm not aware of any thread length limit. I will close this thread and continue the other.

Motor drivers

Motor drivers forum

DRV2605LEVM-MD: Haptic control console software only recognizes DRV2605L, not DRV2605LEVM-MD