HAPTICS-CONSOLE: how to insert data in haptic control console for run DRV2667EVM-CT......

Soumyajit Sarkar

Part Number: HAPTICS-CONSOLE
Other Parts Discussed in Thread: DRV2667EVM-CT

hello

i tried to insert data in the through ram manger and Fifo mode but i was unable to insert. I have try many way but still is not working.

1) how to insert data in haptic control console for run DRV2667EVM-CT??

2) which file will need for insertation in FIFO mode and Ram managers??

3) how it will work??

+1 Jeff McPherson over 1 year ago

Hi Soumyajit,

Section 8.4.2.1 describes how to use RAM Manager to play waveforms. These files must be in .bin form. FIFO is used in Hex form

Best regards,
Jeff McPherson

0 Soumyajit Sarkar over 1 year ago in reply to Jeff McPherson

All the requirement are fulfilled but Still isn't works ?? It shows errors ?? how to insert ??

0 Gerald over 1 year ago in reply to Jeff McPherson

Hi Jeff,

Our customer reached out to us with an error while trying to do this. Below is the information he provided:

I am trying to Upload file in the RAM Manager but its shows error.

I have 2 KB file in .bin Format but still i encounter Error.

I hope you can help him further. Thank you.

Best regards,
Gerald

0 Marvn Arcangel over 1 year ago in reply to Jeff McPherson

Hi Jeff,

Heres an additional error information from the customer

I hope you can help further.

Thanks and regards,

Marvin

0 Jeff McPherson over 1 year ago in reply to Marvn Arcangel

Hi Marvin and Gerald,

Are you both supporting Soumyajit or is this issue across different customers?

Can you share with me the .bin file in question so I can test this on my side? We can use email if privacy is needed.

Thank you,
Jeff McPherson

0 Soumyajit Sarkar over 1 year ago in reply to Jeff McPherson

okay please share your email.

0 Jeff McPherson over 1 year ago in reply to Soumyajit Sarkar

I have sent you a friend request on E2E. Once you accept I can share my email.

Thank you,
Jeff McPherson

Motor drivers forum