HI Team,
The customer would like to know if there is an example for DRV8353RS to drive BLDC in 1×PWM mode for reference. Thanks.
Best Regards,
Cherry
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI Team,
The customer would like to know if there is an example for DRV8353RS to drive BLDC in 1×PWM mode for reference. Thanks.
Best Regards,
Cherry
Hey Cherry,
Please consult page 11/13 of this user's guide for info on how to use the 1x PWM mode and which 0 ohm resistors to populate.
https://www.ti.com/lit/ug/slvub79a/slvub79a.pdf
Best,
Akshay
Hey Cherry,
Marking the thread as closed for now. If your question was addressed please mark the thread as resolved.
Please let us know if you have more questions or if you have new questions please post them as a new thread.
Best,
Akshay