DRV8601: How to control the motor operating current

Cherry Zhou

Mastermind 22235 points

Part Number: DRV8601

Hi Team,

The customer would like to know how to control the operating current of the motor. Thanks.

Best Regards,

Cherry

11 months ago

0 Jeff McPherson 11 months ago

TI__Mastermind 31325 points

Hi Cherry,

You could use a series resistor to limit the output current, but there's no way internal to the device to control the current. The output current will be a function of the PWM signal given to the device versus the load attached.

Best regards,
Jeff McPherson

0 Cherry Zhou 11 months ago in reply to Jeff McPherson

TI__Mastermind 22235 points

Hi Jeff,

Thank you for the support!

Could you help tell what are the function relationships? Is the voltage at the output divided by the resistance of the motor to get the current magnitude?

Thanks and regards,

Cherry

0 Jeff McPherson 11 months ago in reply to Cherry Zhou

TI__Mastermind 31325 points

Hi Cherry,

Yes that's correct. So adding a resistor is effectively creating a voltage divider with the load. The power delivered at the load will be less, but that's unavoidable.

Best regards,
Jeff McPherson

Motor drivers

Motor drivers forum

DRV8601: How to control the motor operating current