DRV8706S-Q1EVM: About SPI SDO output voltage

Hi

Thank you for answering.
Could you please show me the SDO output voltage at 1mA?
(Actually, it is around 30uA and 5mA is excessive, so I would like to use a value with revised requirements.)

The minimum input voltage value of the CPU I am currently using is the same as VDD*0.8, so I would like to have a margin in the design.

Hi,

Thank you for answering.
Is it okay to understand that the 30 pieces of data you have responded to are data for the worst requirements such as temperature conditions?

Please let me ask you an additional question.
Please also tell me about the current conditions for SDO.
Is it correct to understand that Idout=5mA?

Hi

Please tell me about the worst case conditions.
Temperature conditions: Please tell me the temperature conditions.
Power supply voltage: 5.5V
Outflow current: 5mA
Please tell me why the measurement conditions this time are the worst.
Also, would it be difficult to receive 30 pieces of data?

Could you also tell me about the difference from the 0.8*VDD condition written in the data sheet?

Hi

Thank you for answering. And I'm sorry many times.

Is it difficult to get information on just the average value and standard deviation of 30 typical values?

Hi 

thank you for your question. Will review it and feedback to you on next Tuesday.

regards

shinya Morita