• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 515 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-010936: Suspected error in layout files - Rev E1

Till Hanten
Prodigy 10 points

Part Number: TIDA-010936

I was browsing through the Gerber files and even though I am no expert, this section for / around U9 (Voltage Level Translator) looks odd. Please see the image with the circled area in question. Can anyone confirm that this is an error?

  • 0
    TI__Intellectual 1620 points

    Hi Hanten,

    Thank you very much for reaching out to us on this problem.

    Yes, it is an error needs to be corrected that pin 8 should not be connected by the polygon. We will update it soon later.

    You can also correct it using the CAD CAE files online, if necessary.

    Best regards,

    Jerome Shan