Tool/software:
I have used the DRV8701 in the past with much success, but this is the first time I have attempted to the DVDD 3.3V LDO as the primary supply for my design. I cannot measure any voltage on the DVDD pin.
I did made a mistake in the layout enabling the nSleep pin but have since severed it during this investigation (red) . Additionally, I have severed (red) the DVDD pin to ensure there isn't a something drawing the DVDD pin down. I am not stumped.
I can measure the supply voltage, 9.6V at VM
I did have the board populated at a fast-turn internet supply, I will be ordering some DRV8701 this weekend to ensure there isn't a counterfeit situation happening, but I suspect this not the case.
Any help would be appreciated,
