This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV2667EVM-CT: USB2ANY firmware update for using Haptic Control Console (HCC)

Guru 29340 points
Part Number: DRV2667EVM-CT
Other Parts Discussed in Thread: USB2ANY, , DRV2605LEVM-CT

Hi Team,

I tried to use Haptic Control Console (HCC) with DRV2667EVM-CT and USB2ANY however having something trouble.
The following red part should indicate "DRVUSBCOM-EVM" however it shows "MSP430-based HID Device" as the following.

According to the following E2E post, I believe USB2ANY firmware update is required however I couldn't find the instructions of how to update. GUI

Could you tell me instructions?

Best Regards,
Yaita / Japan disty