DRV8703D-Q1EVM: Regarding Evaluation boad

Kallepalli vinay kuamr

Part Number: DRV8703D-Q1EVM
Other Parts Discussed in Thread: DRV8703-Q1, DRV8703-Q1EVM

Hai,

Thanks for responding to my previous forms.

we want to control DRV8703-Q1 driver IC in DRV8703D-Q1EVM ( Evaluation Module ) with external micro, so as per my raised forms, those resistors which are connected to them should be removed.

Once we remove them, then board wont work through GUI. So, I want to know the value of those resistors, so that I again put them back.

Will you please share me the value of those resistors which are connected in between driver IC and MSP430 micro.

over 6 years ago

0 Rick Duncan over 6 years ago

TI__Guru** 114905 points

Hi Kallepalli,

The information can be found in the Hardware files located at The Hardware files contain the schematic, layout, bill of materials, and more.

0 Rick Duncan over 6 years ago in reply to Rick Duncan

TI__Guru** 114905 points

Hi Kallepalli,

Correction. The DRV8703-Q1EVM Design Files contain the information you seek.

0 Hector Hernandez Luque over 6 years ago in reply to Rick Duncan

TI__Expert 8980 points

Hi Kallepalli,

Did Rick's suggestion resolve your question?

If so, please close this post by accepting the post is resolved in Rick's highlighted in yellow answer above me.

Thanks!

Motor drivers

Motor drivers forum

DRV8703D-Q1EVM: Regarding Evaluation boad